Bottle for Water, Measuring Total Salt Content in Water and Temperature

The bottle measures the total salt content in the water poured into it and displays the measurement results on a digital indicator;

If the salt content is less than 200 ppm, then the bottle glows green; if the salt content is more than 200 ppm, the bottle glows red;

To determine the salt content in water, a patented contactless conductivity measurement technology is used, which excludes the contact of measuring electrodes with water in a bottle;

  • The flow of electrolytic processes on the surface of the measuring electrodes, which is accompanied by the release of electrolysis products and water pollution, is excluded;
  • Measures the temperature of the water in the bottle.

You not only drink ecological soft tasty water, but also evaluate its quality using an environmentally friendly method.


Why is information on the total salt content of drinking water needed?
Hard water does not always lead to kidney stones, but it can increase the risk of one. Very hard water with salt levels above 400 ppm can increase the risk of kidney stones. In most cases of kidney stones, the blood in the human body, due to certain congenital problems, begins to absorb more calcium from water and food than is actually needed. As a result, excess calcium is deposited on the walls of the kidneys during the excretion process.
Thus, by drinking water with a high salt content, we put ourselves at risk of falling into those 30 million people in the United States suffering from urolithiasis.

 

The bottle contains a lid with devices for convenient drinking of water and a flask made of ecological plastic. A measurement and control unit is screwed into a plastic flask. The conductivity sensor is located on the upper surface of the measuring block. A digital indicator of salt content, electrical conductivity and temperature is located at the bottom of the bottle. The power supply of the bottle is Lithium Metal batteries with a voltage of 3 V.

The bottle has the following modes of operation:

  • mode for measuring the total salt content in ppm;
  • measurement mode of water conductivity in µS/cm;
  • water temperature measurement mode in F/Cº;
  • mode for setting the threshold value of the total salt content in water.

The bottle works like this:
– after filling the bottle with water, press the power button;
– by successive pressing the power button, select the operating mode;
– the digital indicator will show the measured parameter of the selected mode of operation.
– if the salt content is less than 200 ppm, then the bottle glows green,
– when the salt content is more than 200 ppm, the bottle glows red.
The glow of the bottle and the digital indicator continues for 1 minute, after which they turn off. To re-determine the salt content in the water, press the power button.

Main Technical Characteristics

Main function: measurement of total salt content in water;

Conductivity sensor type: contactless;

The threshold value of total salt content: 200 ppm;

Conductivity measuring range: from 1 µS/cm to 1000 µS/cm;

Measuring range of total salt content: from 2 ppm to 500 2 ppm;

Age range (description): any age group;

Product dimensions: 2,95 х 3,94 х 11 inches;

Product care instructions: Hand wash only;

Recommended use of the product: ‎Fitness, Sports;

Battery: 3V lithium metal battery;

Volume: 24 oz

Address

27251 Wesley Chapel Blvd Suite 1135
Wesley Chapel, FL 33544, USA

Call Us

+1 734 496 4715

Email Us

info@elecwa.com